This article will cover the Standard Procedures for rescue of surface supplied divers. It covers CPR, identification and rescue of a diver who has been lost. It is important to have a complete certification before you can rescue a diver. It will help you save the lives and property of other divers during an emergency. It discusses how to locate the victim, perform CPR on unconscious divers, and other important topics.
Standard procedure for rescue of a surface-supplied diver
Rescuers are required to quickly rescue a surface-sustained diver in distress. This usually means a bell, or an area that the diver can not drown, and where first aid can easily be given. However, there are times when it may not be possible to reach the diver through the bell, so rescue divers must modify their response to meet the situation.
The first step to rescue is to ensure the divers' umbilicals are secure. The bell should be removed by the diver. This is the area where the umbilical enters. The surface tender should then follow in the footsteps of the diver's umbilical as it leaves the bell. Depending on which bell you have, the diver might also be supplied via the umbilicals within the bell. To avoid snagging the umbilicals, they must be secured.
The diver's tender, as well as the diving supervisor, should direct the rescuers. A standby diver might perform other tasks while a diver's life is saved. However, they must be able provide emergency help to the diver if necessary. It is vital to maintain constant contact with the diver during this procedure.
How to identify a lost diver
It can be hard to identify a missing diver. But there are many ways you can find him. First, contact your local authorities. The diver was reported missing by Mukilteo police on June 17. Police and fire departments responded to this call. Coast Guard divers and sheriff's officers searched the area. However, they were unable to find Korompis and his partner.
Another option for finding a lost diver is to use a MOB device. This device uses an underwater radio signals to transmit a distress signal. However, the device is only functional if the signal is received by nearby vessels. It is highly recommended that this device be used, however it is not always possible. Some boats do not have AIS technology. They will not be able find a lost diver. However, if the vessel does have an AIS system, it will allow SAR services to find the diver and assist them.
CPR for an unresponsive diver
CPR can be used to revive a diver who isn't breathing. To open the airway, slide your hand beneath the diver's arm. Or reach up to the diver and hold their breathing equipment. Then pinch the nose of your diver and gently roll him or her toward you. If breathing is not returning, give two rescue breaths and repeat the procedure two to three times.
It is important not to try to recover the bell from the diver's mouth during CPR. This could lead to blood pooling. It is important to continue rescue breathing until the diver is able to regain consciousness. This may require transferring the diver to a decompression chamber on deck. Performing CPR on an unresponsive diver may be a complicated task, but it is necessary.
Positive buoyancy can be used to bring the diver to the surface if you can see his pulse. This will help you evaluate the condition of unresponsive divers and determine if they need rescue breaths. If the diver is not breathing, you can alternate two rescue breaths with thirty chest compressions. Alternate the breathing pattern for a maximum of 30 seconds.